Dilute Phase Conveying System Manufacturers India

Approx. Rs 1.25 Lakh / PieceGet Latest Price

Additional Information:

Approx. Rs 2.5 Lakh / PieceGet Latest Price

Additional Information:

Approx. Rs 2.95 Lakh / PieceGet Latest Price

Dilute phase transport: negative pressure system
Negative pressure systems generally use positive displacement (roots type) exhausters providing up to 50% vacuum to convey materials through a pipeline to the destination where the air and product are separated at a receiving vessel with a filter, or a cyclone.

The product enters the convey line directly, or if metering is required, via a special feeding device such as a rotary valve or screw feeder. The conveyed product is discharged from the receiving vessel either on a continuous basis by a rotary airlock or intermittently by valves to surge hoppers, storage vessels or other discharge points.

In vacuum conveying, no moving parts contact the materials and no dust can escape into the atmosphere. Because of this superior leak containment, they are often specified on the basis of cleanliness, particularly when handling hazardous materials.

The drawback of this system is that if the loading is high or the length of the system is large, the components must be designed for high vacuum. This adds cost to the components and must be considered when comparing methods of transport.

The pneumatic conveying system is a method of conveying dry material in a pipeline through air without any moving parts. The pneumatic conveying is necessarily custom made conveying system & based on product characteristics, particle size, throughput capacity, number of sources and number of destinations. Each pneumatic conveying system is designed & customized as per the application popularly known as custom conveyor system. The provided solution is assured to be the best pneumatic conveying system solution for the application. Being the application experts & pneumatic conveying system manufacturer, we always assure to deliver best of both the worlds (commercial & technical worlds).

Additional Information:

Approx. Rs 2.25 Lakh / PieceGet Latest Price

Additional Information:

Approx. Rs 2.55 Lakh / PieceGet Latest Price

Dilute phase pneumatic conveying is a method of moving non-abrasive, non-fragile materials that have a low bulk density. The materials move along an enclosed pipe, in slug form using small amounts of gas at a high velocity and low pressure. This article introduces the two most common types of dilute phase conveying – pressure and vacuum.

WHY CHOOSE PRESSURE CONVEYING

Our dilute phase pneumatic conveying systems use large amounts of low-pressure (<15 PSIG) to convey materials. In this method, a blower at the system’s start supplies a high volume of low-pressure air to the system, and material is fed into the conveying line through a rotary airlock valve. The system relies on the air stream’s velocity to pick up and entrain each particle, keeping the particles in suspension as they travel through the conveying line.

FAST FACTS:

Requires relatively little headroom. 

Simple to operate. 

Ideal for conveying materials from a single source to multiple destinations. 

Most often used with non-abrasive, non-fragile materials that have a light bulk density (typically less than 62 lb/ft3). 

Common examples are: flour, sugar, corn starch, plastic granules, sodium bicarbonate, hydrated lime, activated carbon, and zinc oxide.

Additional Information: