Pipe Chain Conveyors With Professional Design

Approx. Rs 15,500 / PieceGet Latest Price

2. System Overview

• Tube Chain Conveyor: Designed to transport bulk materials efficiently. The system is suitable for handling various materials in different orientations.
• PLC Control Panel: Automates the operation of the conveyor, managing speed, direction, and sequences.
• HMI Panel: Provides an interface for operators to monitor and control the conveyor system.

• Only trained personnel should operate the system.
• Always wear appropriate personal protective equipment (PPE).
• Ensure all safety guards and covers are in place before starting the system.
• Do not bypass or disable any safety devices.
• Follow lockout/tagout procedures before performing maintenance.

• Drive Motor and Gearbox: Powers the chain movement.
• Chain and Tubes: Transport bulk materials through the system.
• Sensors: Monitor conveyor speed, load, and chain position.
• Control Panel (PLC & HMI): Manages system operation, speed, and direction control.

1. Check the System: Ensure all components are in good condition and properly aligned. Verify that there are no obstructions in the conveyor path.
2. Power Up: Turn on the main power supply to the control panel.
3. HMI Operation:
   • Navigate to the main screen on the HMI.
   • Check system status for any errors or alarms. Resolve any issues before proceeding.
   • Select the desired operating mode (e.g., manual, automatic).
4. Start Conveyor:
   • In automatic mode, the system will start based on pre-programmed settings.
   • In manual mode, press the Start button on the HMI or control panel to initiate the conveyor.

• Main Screen: Displays the operational status, system speed, and load capacity.
• Control Options:
  • Start/Stop: Start or stop the conveyor.
  • Speed Adjustment: Adjust the conveyor speed using the provided controls.
  • Direction Control: Set the conveyor to move in forward or reverse mode.
• Settings Menu: Adjust system parameters and program specific sequences.

• The system will operate based on the programmed sequence in the PLC. It will automatically adjust speed and direction according to the preset requirements.
• Monitor the HMI for any alerts or messages indicating operational changes or issues.

• Use manual controls on the HMI or control panel to operate the conveyor. This mode is typically used for maintenance, troubleshooting, or setup purposes.

1. Stop Conveyor: Use the Stop button on the HMI or control panel to halt operation.
2. Turn Off Power: Switch off the main power supply after the conveyor has completely stopped.

• Routine Maintenance: Regularly check and lubricate the chain, inspect the drive motor, and verify sensor functionality.
• Chain Inspection: Check for proper tension and alignment. Adjust or replace if necessary.
• Motor and Gearbox: Inspect for smooth operation. Check for any unusual noises or vibrations.

Additional Information:

Approx. Rs 1,25,000 / PieceGet Latest Price

Additional Information: