Nauta Mixer manufacturers in india

Approx. Rs 1,80,000 / PieceGet Latest Price

Double Screw Cone Type Mixer 
Double screw mixer is convection mixer of high efficiency.It has characteristic of gentle, high accuracy mixing and no damage to product.Two screws suspended from a turning arm, with different rotation semi diameter and different length, make three-dimensional action;Meantime, two screws make self rotation.
Helix cone mixer application:
1.Applicable material proportion of the poor, the powder particles are relatively large materials;2.Suitable for ceramic glaze mixing gentle process, the material particles do not pressure-fed or broken;3.The heat-sensitive materials will not overheat;4.In the powder - powder mixing process is very easy to add working conditions or providing a liquid to a plurality of spray outlet means;5.The bottom valve of dislocation convenient material, since the bottom of the spiral no fixtures, so there is no pressure fed phenomenon
Features:1.Homogeneous mixing2.Short mixing time 5-15 minutes3.Clean discharge & no leftover4.Central discharge valve:Electronic, pneumatic, manual (optional)Ball valve, flap valve, knife gate valve, butterfly valve (optional)5.Main shaft seal:Stuffing seal and air purge seal6.Drive:Siemens motor, cycloid or gear reducer7.Limit/safety switch (optional)8.Heating/cooling jacket optional)Technical specifications:
Mixer Model Working volume(L) Rotation speed(rpm) Motor Power(kw) Overall Dimension(mm) Machine 

Additional Information:

Approx. Rs 1,65,000 / PieceGet Latest Price

The Double Screw Cone Mixer Machine is a highly efficient and precise mixing system designed to handle a variety of material types across multiple industries. Its innovative double-helix mixing mechanism and compact design deliver superior performance, uniform mixing, and operational reliability.

1. Mixing Chamber:

   • Conical-shaped design ensures efficient material flow and prevents dead zones.
   • Available in carbon steel,(SS304/SS316), and explosion-proof variants for specific applications.

2. Double Screw Rotor:

   • Two spiral belts mounted on the central rotor lift materials upward during operation.
   • Promotes efficient mixing by inducing vertical and radial material flow.

3. Cantilever Arm:

   • Rotates along the axis of the cone, driven by a geared reducer.
   • Completes material homogenization in a short time span.

4. Gearbox and Reducer:

   • High-quality helical gear system ensures smooth and reliable motion of the screws and arm.
   • Energy-efficient operation with low noise.

5. Airtight Operation:

   • Suitable for handling sensitive or volatile materials.

Additional Information:

Approx. Rs 1,25,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 2,55,000 / PieceGet Latest Price

Conical Nauta Mixer With Single Rotary Arm Screw

,A single ARM conical screw, batch mixer designed for segregative, free flowing powders, slurries and pastes. Famous for its low intensity mixing andpioneer in mixing technology it is specially designed to delicate products and processes where very accurate results are required andis synonymous with gentle mixing of large volumes of up to 100,000liters, delivering.>Low power consumption>Fast mixing times>Minimum heat generation>Self emptying, minimum product retention>Moistening of powders>Coating>Granulation>Drying by means of heat input at atmospheric conditions or in combination with vacuum and possible liquid recovery>Coating of solid with liquids

The Nauta mixer is a planetary rotating screw near the wall of cone without end resting of screw. The principle of blending is based on the differential travel speeds of product particles in the conical section of the vessel. The material from the bottom section of vessel is lifted by the screw and spread over the upper sections. The screw agitator turning on its axis produces a lifting action as it spirals the material in an upward flow. At the same time the screw orbits the tank, the screw removes material away from wall and deflects it into the centre of the tank setting up a spiral current thought the batch. The material lifted by the screw gravitates downwards thoroughly intermixing with material being spiraled upward. This results in most intimate intermingling of all ingredients.

Additional Information:

Approx. Rs 2,15,000 / PieceGet Latest Price

Conical Nauta Blender,A single ARM conical screw, batch mixer designed for segregative, free flowing powders, slurries and pastes. Famous for its low intensity mixing andpioneer in mixing technology it is specially designed to delicate products and processes where very accurate results are required andis synonymous with gentle mixing of large volumes of up to 1000liters, delivering. Low power consumption Fast mixing times Minimum heat generation Self emptying, minimum product retention Moistening of powders Coating Granulation Drying by means of heat input at atmospheric conditions or in combination with vacuum and possible liquid recovery Coating of solid with liquids

The Nauta mixer is a planetary rotating screw near the wall of cone without end resting of screw. The principle of blending is based on the differential travel speeds of product particles in the conical section of the vessel. The material from the bottom section of vessel is lifted by the screw and spread over the upper sections. The screw agitator turning on its axis produces a lifting action as it spirals the material in an upward flow. At the same time the screw orbits the tank, the screw removes material away from wall and deflects it into the centre of the tank setting up a spiral current thought the batch. The material lifted by the screw gravitates downwards thoroughly intermixing with material being spiraled upward. This results in most intimate intermingling of all ingredients.

Additional Information:

Approx. Rs 1,35,000 / PieceGet Latest Price

• Type PL: with a capacity of 100 up to 75,000 liters. This model is provided with a screw support at the bottom.
• Type VD: with a capacity from 10 to 25,000 liters. This model has no bearing or support at the bottom of the cantilevered mixing screw. This offers benefits in cleaning the machine. This also provides the option to mount a bottom valve for a total outflow of mixed materials, leaving no residues
• Type VD2: with a capacity starting at 300 up to 35.000 liters, this cone blender is manufactured with 2 mixing screws for short blending processes and allows lower installation heights and the possibility to equip the machine with a large inspection door.

• The standard mixing screw with a full blade and constant diameter offering a rugged and reliable solution for a wide range of applications.
• The conical mixing crew requires more driving power but shortens the total mixing time drastically. By combining the conical screw with a vessel at a larger angle, the overall height of the mixer can be reduced.
• The ribbon, or sanitary screw, can be used for sanitary applications where the product can stick to the screw and present a high risk that need to be prevented. Screw blades are connected to the shaft using spokes to offer easier, better, and faster cleaning.
• Wear-resistant deposition welded or coated mixing screw for processing abrasive powders.

• certified for manufacturing mixers with outstanding mixing quality and accuracy (> 1:100.000)
• cost-effective mixing technology
• low energy consumption (< 2 W/kg)
• mixing installation that requires small floor area for installation
• low maintenance costs
• no product residue after discharging the mixer
• Try one of our demonstration models before you buy. We offer you to test a stainless steel mixer with the capacity of 3, 50 or 150 liters. Please contact us to make an appointment for a test run.

Additional Information:

Approx. Rs 1,25,000 / PieceGet Latest Price

Rotary dryers are used for drying wet powders and cakes, which are easily breakable and dispersible. The rotary dryer consists of a rotating drum with angle lifting blades which lift the feed as the drum rotates and showers it in the stream of hot air flowing through the drum.

The rotary dryers can be used as calciners using direct or indirect firing.

GMP plants are offered for pharmaceutical, food, and biochemical applications. 

Capacity: We can offer the rotary dryers with capacity range from 100kg/hr to 50000kg/hr product rate and operating temperatures up to 600°C.

Typical applications of rotary dryers include silica sand, bagasse, minerals, coconut powder, etc.

Additional Information: